User Access-Control Disable; User Access-Control Ip-Based - TP-Link JetStream TL-SL3428 Cli Reference Manual

Global Configuration Mode
Example
Modify the password of tplink as newpwd:
TP-LINK(config)# user modify password tplink password newpwd newpwd

user access-control disable

Description
The user access-control disable command is used to cancel the user
access-control.
Syntax
user access-control disable
Command Mode
Global Configuration Mode
Example
Cancel the user access-control:
TP-LINK(config)# user access-control disable

user access-control ip-based

Description
The user access-control ip-based command is used to limit the IP-range of
the users for login. Only the users within the IP-range you set here are allowed
for login.
Syntax
user access-control ip-based ip-addr ip-mask
Parameter
ip-addr / ip-mask —— The IP source IP address. Only the users within the IP
range you set here are allowed for login.
Command Mode
Global Configuration Mode
TL-SL3428 JetStream L2 Managed Switch CLI Guide
44