User Access-Control Mac-Based; User Access-Control Port-Based - TP-Link JetStream TL-SL3428 Cli Reference Manual

Example
Enable the access-control of the user whose Ip address is 192.168.0.148:
TP-LINK(config)#
255.255.255.255

user access-control mac-based

Description
The user access-control mac-based command is used to limit the MAC
Address of the users for login. Only the user with this MAC Address you set here
are allowed for login
Syntax
user access-control mac-based mac-addr
Parameter
mac-addr —— The source MAC address.
Command Mode
Global Configuration Mode
Example
Enable
00:00:13:0A:00:01:
TP-LINK(config)# user access-control mac-based 00:00:13:0A:00:01

user access-control port-based

Description
The user access-control port-based command is used to limit the ports for
login. Only the users connected to these ports you set here are allowed for
login.
Syntax
user access-control port-based port-list
Parameter
port-list ——The Ethernet port numbers. You can appoint 5 ports at most.
TL-SL3428
user
the access-control
45
JetStream L2 Managed Switch CLI Guide
access-control ip-based
of the user whose
192.168.0.148
MAC address is