User Max-Number; User Idle-Timeout - TP-Link JetStream TL-SL3428 Cli Reference Manual

Command Mode
Global Configuration Mode
Example
Enable the access-control of the ports 2, port4, port5, port6,and port10:
TP-LINK(config)# user access-control port-based 2,4-6,10

user max-number

Description
The user max-number command is used to configure the number of the users
logging on at the same time. To cancel the limit to the numbers of the users
logging in, please use no user max-number command.
Syntax
user max-number admin-num guest-num
no user max-number
Parameter
admin-num ——The maximum number of the users logging on as Admin,
ranging from 1 to 16. The total number of Admin and Guest should be less than
16.
guest-num ——The maximum number of the users logging on as Guest,
ranging from 0 to 15. The total number of Admin and Guest should be less than
16.
Command Mode
Global Configuration Mode
Example
Configure the number of the users as Admin and Guest logging on as 5 and 3:
TP-LINK(config)# user max-num 5 3

user idle-timeout

Description
The user idle-timeout command is used to configure the timeout time of the
TL-SL3428 JetStream L2 Managed Switch CLI Guide
46