Fujitsu PRIMEQUEST 2000 Series Message Reference page 194

MMB Messages
W_00507
Unable to set the OS Installation Mode because Mirror Mode or POST setting is modified.
Meaning:
The installation mode of the operating system cannot be set because the Mirror Mode or POST has been
modified.
Corrective action:
Since the installation mode of the operating system is exclusive, specify as standalone.
Severity:
Warning
W_00508
Unable to set the OS Installation Mode.
Meaning:
The installation mode of the operating system cannot be set.
Corrective action:
After powering on the partition, wait for some time and then change the mode.
Severity:
Warning
W_00516
The replaced SB is unsupported. Please check then reinstall the SB#%d.
Meaning:
An unsupported SB was replaced.
Corrective action:
Replace after checking the SB.
Severity:
Warning
E_00517
Unable to power on the partition#%d due to abnormal SB composition.
Meaning:
The partition cannot be powered on because of a problem in the SB configuration.
Corrective action:
Check the mix status of the SB configuring the partition.
Severity:
Error
W_00518
Unable to power on the partition#%d due to SB composition abnormal.
After checking SB status and configuration, please come back to the Replacement Instruction
Window, and reinstall the unit.
Meaning:
If there is a problem in the configuration of the SB in the Power On process of the partition, 'Unable to power
on the partition due to a problem in the SB configuration' is notified.
Corrective action:
The next window is be displayed by clicking the [OK] button of the dialog.
Check if there is any problem in the SB of the currently displayed window.
Return up to the replacement instruction window and perform the replacement again.
Severity:
Warning
E_00519
Unable to add the specified SB to the partition due to SB composition abnormal.
Meaning:
The specified SB cannot be added to the partition because of problem in its configuration.
Corrective action:
Check the mix status of the SB.
Severity:
Error
C122-E178-02EN
178