Fujitsu PRIMEQUEST 2000 Series Message Reference page 174

MMB Messages
The system will leave Maintenance Mode. Are you sure?
Meaning:
When an attempt was made to cancel the maintenance mode, and the, [OK] button is clicked, 'Canceling the
maintenance mode. Another user may be performing maintenance. Are you sure?' is notified.
Corrective action:
When the [OK] button is clicked when canceling the maintenance mode, the first window would be displayed.
To keep the maintenance mode, click the [Cancel] button. The current window will appear. The browser
returns to the first window when the [Previous] button is clicked.
Severity:
Info
I_00233
One or more partitions are powered on. Are you sure you want to release Maintenance Mode?
Meaning:
When an attempt is made to release the maintenance mode and the [OK] button is clicked, while there is a
powered on partition under maintenance, a confirmation message, ' The partition power is on. Do you want
to cancel the maintenance mode?' is displayed.
Corrective action:
The first window is displayed when the [OK] button is clicked while canceling the maintenance mode. This
window appears when the [Cancel] button is clicked to keep the maintenance mode. When the [Previous]
button is clicked the browser returns to the first window.
Severity:
Info
W_00233
Unable to select a unit with all partition powered on.
Please check that you selected the right type of unit, then check that the power status of partitions is
Standby in the Partition Power Control Window.
Then please try again.
Meaning:
There is no unit that can be maintained, because the partition power is on.
Corrective action:
Check if the correct unit has been selected, or whether the status of the partition power is Standby in the
[Partition Power Control] window.
After confirmation, start the maintenance work again.
Severity:
Warning
I_00236
The %aa firmware update has been completed successfully.
Meaning:
This message appears when the specified firmware has been updated successfully. 'The firmware of %aa
has been successfully updated' is notified.
Corrective action:
No action is necessary.
Severity:
Info
W_00236
Failed to switch Location LED on, but maintenance will still continue.
After Maintenance completion, Check the System Event Log Window to refer to the error details.
Meaning:
Location LED lighting has failed. There may be a fault, but the process is continued since this does not affect
the maintenance work.
Corrective action:
As there may be a fault in the relevant unit, check the system event log after the maintenance work.
Severity:
Warning
I_00237
C122-E178-02EN
158