Fujitsu PRIMEQUEST 2000 Series Message Reference page 99

MMB Messages
Adapter error (Adapter failed to init; mbxCmd READ_REV)
Meaning:
Initialization of the adapter failed.
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales representative or a field
engineer.
Severity:
Warning
12033
Adapter error (Adapter failed to init; mbxCmd READ_REV detected outdated firmware)
Meaning:
Initialization of the adapter failed. The HBA firmware revision could not be identified during initialization.
Corrective action:
Hardware or firmware has a fault. Update the firmware. If the error keeps recurring, contact your sales
representative or a field engineer.
Severity:
Warning
12034
Adapter error (Adapter failed to init; mbxCmd CONFIG_PORT)
Meaning:
Initialization of the adapter failed.
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales representative or a field
engineer.
Severity:
Warning
12035
Adapter error (Adapter failed to init; mbxCmd CFG_RING)
Meaning:
Initialization of the adapter failed.
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales representative or a field
engineer.
Severity:
Warning
12037
Adapter error (Adapter failed init; mbxCmd READ_SPARM)
Meaning:
Initialization of the adapter failed.
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales representative or a field
engineer.
Severity:
Warning
12039
Adapter error (Adapter failed to init; mbxCmd READ_CONFIG)
Meaning:
Initialization of the adapter failed.
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales representative or a field
engineer.
Severity:
Warning
C122-E178-02EN
83