Fujitsu PRIMEQUEST 2000 Series Message Reference page 29

MMB Messages
Warning
15070202
CPLD access failure
Meaning:
There is a possible CPLD failure.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
15070204
EEPROM access failure
Meaning:
There is a possible EEPROM failure.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
15070209
Firmware error
Meaning:
The firmware may be corrupted.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
1507020A
Chassis Information mismatch
Meaning:
There is mismatch of cabinet information.
Corrective action:
An MMB must be replaced. If the problem persists, the OPL must be replaced.
Severity:
Error
1507020B
MMB reboot (panic)
Meaning:
MMB panic reboot was detected.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
1507020E
Configuration Data error MMB
Meaning:
The configuration data may be corrupted.
Corrective action:
An MMB must be replaced. If the problem persists, another MMB must be replaced.
Severity:
Error
Remarks
This error is basically from the Standby side.
15070261
C122-E178-02EN
13