Fujitsu PRIMEQUEST 2000 Series Message Reference page 168

MMB Messages
Specify the partition.
Severity:
Info
W_00208
The power status of one of the partitions is now On.
The selected Maintenance Operation Mode has become unavailable.
Please check that the power status of partitions is Standby in the Partition Power Control Window.
Then please try again.
Meaning:
After Warm System Maintenance or Cold System Maintenance is selected and the [Next] button is clicked, if
the power status of the target partition has been changed due to a user operation, 'Maintenance cannot be
performed in the selected maintenance mode, as the power status of the partition has been changed. Check
the partition status and try again' is notified.
Corrective action:
Check the power status of the partition in the [Partition Power Control] window. If the status is On, ask the
system administrator to turn off the partition power. After confirmation, restart the maintenance work.
Severity:
Warning
W_00209
Failed to restore FAN Speed Mode, but maintenance will still continue.
After Maintenance completion, Check the System Event Log Window to refer to the error details.
Meaning:
If 'FAN speed restoration process', which is executed when returning to the previous window by clicking the
[Previous] button, during Hot System Maintenance / Warm System Maintenance, is abnormally terminated,
'Failed in restoring the FAN speed. The process will continue, but check the system event log after
completion of the maintenance work' is notified.
Corrective action:
Failed in restoring the FAN speed, but since this does not affect the maintenance operation, continue the
operation. Check the system event log after completing the maintenance work.
Severity:
Warning
I_00210
Please select a maintenance area.
Meaning:
The maintenance area (Partition/System) had not been specified when the [Next] button in the [Maintenance
Wizard (Maintenance Area)] window was clicked.
Corrective action:
Specify the maintenance area.
Severity:
Info
W_00210
Failed to restore PCI_Box FAN Speed Mode, but maintenance will still continue. After Maintenance
completion, Check the System Event Log Window to refer to the error details.
Meaning:
When the 'FAN speed restoration process' of the PCI_Box was abnormally terminated when returning to the
previous window by clicking the [Previous] button from the replacement confirmation window during Hot
System Maintenance / Warm System Maintenance, 'Failed to restore the FAN speed of the PCI_Box. The
process will continue, but check the system event log after completion of the maintenance work' is notified.
Corrective action:
Failed in restoring the of the PCI_Box FAN speed, but since this does not affect the maintenance operation,
continue with the operation.
Check the system event log after completing the maintenance work.
Severity:
Warning
I_00211
C122-E178-02EN
152