Overview Of Messages; Chapter 1 Overview Of Messages; How To Read The Mmb Messages; System Event Log - Fujitsu PRIMEQUEST 2000 Series Message Reference

Overview of Messages

CHAPTER 1
This chapter describes how to read the PRIMEQUEST 2000 series messages.
1.1

How to read the MMB messages

This chapter describes how to read the messages that are stored in the MMB. For the details on how to open the
MMB window, see '1.7 Basic operations of the Web-UI window' in the PRIMEQUEST 2000 series User Interface
Operating Instructions (C122-E109). For the MMB messages, see Chapter 2 MMB Messages.
Note
If a [Part Number] or [Serial Number] UI (contents or information area) displays 'Read Error' check the
details of the error in '11.2 Troubleshooting' in the PRIMEQUEST 2000 series Administration Manual' (C122-
E108) . If the problem could not be resolved even then, contact your sales representative or field engineer.
Before contacting, confirm the model name and serial number shown on the label affixed to the main unit.
If 'Read Error' is displayed, do not perform operations in the partitions ([Reset] or [Force Power Off])

1.1.1 System event log

The events that occur in the PRIMEQUEST2000 series are stored as a system event log.
The MMB Web-UI [System Event Log] window displays the list.
The following section describes how to display the [System Event Log] window, and the display items, and
how to download the log data.
Displaying the [System Event Log] window
1. Select in the order of [System] — [System Event Log].
[System Event Log] window appears displaying the stored system event log.
'FIGURE 1.2 [System Event Log]
Overview of Messages
FIGURE 1.1 Information area
window' shows an example of the [System Event Log] window.
1
C122-E178-02EN