Connector Defi Nitions - Supero SUPERSERVER 6017R-N3RF4+ User Manual

5-8 Connector Defi nitions
ATX Power Connector
The primary ATX power supply con-
nector meets the SSI EPS 12V speci-
fi cation. Make sure that the orientation
of the connector is correct. See the
table on the right for pin defi nitions.
Processor Power Connectors
JPW2 and JPW3 must also be con-
nected to the power supply to provide
power for the processor(s). See the
table on the right for pin defi nitions.
4-pin Power Connectors
JPW4 should also be connected to
the power supply. See the table on
the right for pin defi nitions.
Warning: To prevent damage to your power supply or serverboard, please
use a power supply that contains a 24-pin and two 8-pin power connec-
tors. Be sure to connect these power connectors to the 20-pin and the two
!
8-pin power connectors on your serverboard for adequate power supply to
your system. Failure to do so will void the manufacturer warranty on your
power supply and serverboard.
Chapter 5: Advanced Serverboard Setup
ATX Power 24-pin Connector
Pin Defi nitions
Pin# Defi nition
13 +3.3V
14 -12V
15 COM
16 PS_ON
17 COM
18 COM
19 COM
20 Res (NC)
21 +5V
22 +5V
23 +5V
24 COM
12V 8-Pin Power Connector
Pin Defi nitions
Pins
1 through 4
5 through 8
12V 4-pin Power
Connector
Pin Defi nitions
Pins
1~2
3~4
5-15
Pin # Defi nition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Defi nition
Ground
+12V
Defi nition
Ground
+12V