Table of Contents
Advertisement
S
S
UPER
ERVER 6017R-N3RF4+/6017R-N3RFT+ User's Manual
Fan Headers
The serverboard has six system/
CPU fan headers (Fan 1~Fan 5, Fan
A). All are 4-pin fans headers, which
are backward compatible with tradi-
tional 3-pin fans. Fan speed control is
available for 4-pin fans only. The fan
speeds are controlled by IPMI. See
the table on the right for pin defi nitions.
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach an appropriate cable
from the chassis to inform you of a
chassis intrusion when the chassis
is opened.
Internal Speaker
The Internal Speaker, located at SP1,
can be used to provide audible indica-
tions for various beep codes. See the
table on the right for pin defi nitions.
Refer to the layout below for the lo-
cations of the Internal Buzzer (SP1).
Overheat/Fan Fail LED
The JOH1 header is used to connect
an LED indicator to provide warnings
of chassis overheating and fan failure.
This LED will blink when a fan failure
occurs. Refer to the tables on right for
pin defi nitions.
Fan Header
Pin Defi nitions
Pin#
Defi nition
1
Ground
2
+12V
3
Tachometer
4
PWR Modulation
Chassis Intrusion
Pin Defi nitions
Pin#
Defi nition
1
Intrusion Input
2
Ground
Internal Buzzer (SP1)
Pin Defi nition
Pin#
Pin 1
Pos. (+)
Pin 2
Neg. (-)
OH/Fan Fail LED
Status
State
Solid
Blinking
5-18
Defi nitions
Beep In
Alarm
Speaker
Message
Overheat
Fan Fail
Advertisement
Table of Contents
