Table of Contents
Advertisement
S
S
UPER
ERVER 6017R-N3RF4+/6017R-N3RFT+ User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 6017R-N3RF4+/6017R-N3RFT+ lies the X9DRW-
3LN4F+/X9DRW-3TF+, a dual processor serverboard based on the Intel® C606
chipset. Below are the main features of the serverboard. (See Figure 1-1 for a
block diagram of the chipset).
Processors
The X9DRW-3LN4F+/X9DRW-3TF+ supports single or dual Intel® E5-2600 Series
processors in LGA2011 sockets. Please refer to our web site for a complete listing
of supported processors (www.supermicro.com).
Memory
The X9DRW-3LN4F+/X9DRW-3TF+ has 24 memory sockets that can support up
to 768 GB of ECC registered DDR3-1333/1066/800 RDIMMs or up to 192 GB of
unbuffered DDR3-1333/1066/800 UDIMMs. Please refer to Chapter 5 for installing
memory.
Onboard SAS
A SAS controller is integrated into the chipset and provides eight SAS2 ports. The
hot-swap SAS drives are connected to a backplane that provides power, bus ter-
mination and confi guration settings. RAID 0, 1 and 10 are supported.
Onboard Serial ATA
A SATA controller is integrated into the chipset to provide a six-port SATA sub-
system. Two of the ports support SATA 3.0 and four support SATA 2.0 (see
Chapter 5 for details). RAID 0, 1, 5 and 10 are supported. The SATA drives are
hot-swappable units.
Rear I/O Ports
The color-coded I/O ports include one COM port, a VGA (monitor) port, two USB
2.0 ports, PS/2 mouse and keyboard ports, one dedicated IPMI LAN port and four
gigabit Ethernet ports. Two of the LAN ports on the 6017R-N3RFT+ (X9DRW-3TF+)
are 10 Gb Ethernet ports.
Graphics Controller
The X9DRW-3LN4F+/X9DRW-3TF+ features an integrated G200 (Renesas SH7757
BMC) graphics chip.
1-2
Advertisement
Table of Contents
