Connector Defi Nitions - Supero SUPERSERVER 5017K-N6 User Manual

S S
UPER ERVER 5017K-N6 User's Manual
5-8 Connector Defi nitions
Power Connectors
The 24-pin main power connector
(JPW1) and the 8-pin auxilliary power
connector (JPW2) are used to provide
power. Either one may be used to
supply power to the motherboard.
These connectors meet the SSI EPS
12V specifi cation. See the table on
the right for pin defi nitions.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1.
Momentarily contacting both pins
will power on/off the system. To turn
off the power when set to suspend
mode, press the button for at least
4 seconds. Refer to the table on the
right for pin defi nitions.
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. Attach
it to a hardware reset switch on the
computer case. Refer to the table on
the right for pin defi nitions.
ATX Power 24-pin Connector
Pin Defi nitions (JPW1)
Pin# Defi nition
13 +3.3V
14 -12V
15 COM
16 PS_ON
17 COM
18 COM
19 COM
20 Res (NC)
21 +5V
22 +5V
23 +5V
24 COM
NC = No Connection
12V 8-pin Power Connector
Pin Defi nitions (JPW3)
Pins
1 through 4
5 through 8
Pin Defi nitions (JF1)
Pin#
1
2
Pin Defi nitions (JF1)
Pin#
3
4
5-8
Pin # Defi nition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Defi nition
Ground
+12V
Power Button
Defi nition
Signal
Ground
Reset Button
Defi nition
Reset
Ground