S
S
UPER
ERVER 6017R-N3RF4+/6017R-N3RFT+ User's Manual
Accessing the Drive Bays
Hard Drives: Because of their hotswap capability, you do not need to access the
inside of the chassis or power down the system to install or replace the SAS/SATA
drives. Proceed to the next section for instructions.
DVD-ROM Drive: For installing/removing a DVD-ROM drive, you will need to gain
access to the inside of the 6017R-N3RF4+/6017R-N3RFT+ by removing the top
cover of the chassis. Proceed to the "DVD-ROM Drive Installation" section later in
this chapter for instructions.
Note: Only a "slim" DVD-ROM drive will fi t into the 6017R-N3RF4+/6017R-N3RFT+.
Warning! Enterprise level hard disk drives are recommended for use in
Supermicro chassis and servers. For information on recommended HDDs,
!
visit the Supermicro Web site at http://www.supermicro.com/products/nfo/
storage.cfm
Figure 6-2. System Cooling Fans
6-4