Connector Defi Nitions - Supero SUPERSERVER 2026T-6RFT+ User Manual

LED
LED1
LED2
LED3
LED4
LED5
LED6
LED7
5-8 Connector Defi nitions
ATX Power Connector
The primary ATX power supply con-
nector meets the SSI EPS 12V speci-
fi cation. Make sure that the orientation
of the connector is correct. See the
table on the right for pin defi nitions.
Processor Power Connectors
JPW2 and JPW3 must also be con-
nected to the power supply to provide
power for the processor(s). See the
table on the right for pin defi nitions.
Warning: To prevent damage to your power supply or serverboard, please use a power
supply that contains a 24-pin and two 8-pin power connectors. Be sure to connect
these power connectors to the 20-pin and the two 8-pin power connectors on your
serverboard for adequate power supply to your system. Failure to do so will void the
manufacturer warranty on your power supply and serverboard.
Chapter 5: Advanced Serverboard Setup
Description
Power LED
UID LED
BMC Heartbeat LED
SAS Activity LED
SAS Heartbeat LED
SAS Error LED
UID LED
5-15
ATX Power 24-pin Connector
Pin Defi nitions
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Processor Power Connector
Pin Defi nitions
Pins Defi nition
1 through 4 Ground
5 through 8 +12V