Connector Defi Nitions - Supero MicroCloud User Manual

S S
UPER ERVER 5037MC-H12TRF User's Manual
5-9 Connector Defi nitions
IF + POWER
This edge connector, located on the opposite end of the motherboard from the I/O
back panel, is used to connect the motherboard to the backplane of the server
chassis. Through this connector, the motherboard will receive its power and com-
municate with the rest of the system (hard drives, warning lamps, etc).
SATA DOM Power
The SATA DOM Power header on JSD1
is used to supply power to SATA Disk-
on-Module (DOM) solid-state storage
devices. See the table on the right for
pin defi nitions.
Internal Speaker
The internal speaker/buzzer, located at
SPKR1, can be used to provide audible
indications for various beep codes. See
the table on the right for pin defi nitions.
DOM PWR
Pin Defi nitions
Pin# Defi nition
1 +5V
2 Ground
3 Ground
Internal Buzzer (SP1)
Pin Defi nition
Pin#
Pin 1 Pos. (+)
Pin 2 Neg. (-)
5-12
Defi nitions
Beep In
Alarm
Speaker