Table of Contents
Advertisement
S
S
UPER
ERVER 6017R-N3RF4+/6017R-N3RFT+ User's Manual
T-SGPIO 1/2 Headers
Two SGPIO (Serial-Link General
Purpose Input/Output) headers are
located at J17 and J18. These head-
ers support Serial Link interface for
onboard SATA connections. See the
table on the right for pin defi nitions.
DOM Power Connector
A power connector for SATA DOM
(Disk On Module) devices is located at
JSD1. Connect an appropriate cable
here to provide power support for your
DOM devices.
RAIDKey Header
A RAIDKey header (JRK1) provides
RAID function support to enhance
system performance.
10G LAN3/LAN4 LED Indicators
(X9DRW-3TF+ Only)
The NIC (Network Interface Control-
ler) LED connections for 10G LAN
port 3 are located on pins 3 and 4 of
JF2, and the LED connections for 10G
LAN port 4 is on Pins 1 and 2 of JF2.
Attach NIC LED cables here to display
network activities. Refer to the table
on the right for pin defi nitions.
Note: The NIC LED connections for
LAN Ports 1/2 are located on JF1.
T-SGPIO
Pin Defi nitions
Pin#
Defi nition
1
NC
3
Ground
5
Load
7
Clock
Note: NC indicates no connection.
DOM PWR
Pin Defi nitions
Pin#
Defi nition
1
+5V
2
Ground
3
Ground
RAIDKey
Pin Defi nitions
Pin# Defi nition
1
Ground
2
Signal
3
Ground
10G LAN Ports 3/4 LED Indicators (JF2)
Pin Defi nitions
Pin#
Defi nition
1
LAN4 Activity
3
LAN3 Activity
5-20
Pin
Defi nition
2
NC
4
Data
6
Ground
8
NC
Pin
Defi nition
2
LAN4 Link
4
LAN3 Link
Advertisement
Table of Contents
