Planet GRT-101 User Manual page 73

PLANET Technology Corp.
General system information
Model
Software Version :101029E4
CPU
RAM
Flash
Chipset
Firmware Version :3130BE6B
Hostname
System Time
If GRT-101/GRT-401/GRT-402 is out of date, get the latest version from your
service provider by the trivial file transfer protocol (TFTP). The TFTP allows
you to transfer new software images to upgrade GRT-101/GRT-401/GRT-402.
Refer to section 3.17.1 Backup configuration to backup a copy of your
configuration file before upgrading it so you can easily recover the
configuration when necessary.
The following example shows you how to get a kernel software image from a
TFTP server 192.168.0.200, where the image file name is "kernel.bin":
admin# upgrade kernel 192.168.0.200 kernel.bin
TFTP server IP address: 192.168.0.200
Upgrade filename: kernel.bin
Connecting...
Download
Byte Transferred :
Complete
Transfer Complete, Replace Now? (y/n): y
Writing flash....................... OK!
Do you want to reboot? (y/n): y
Be sure to write the new image to NVRAM and immediately reboot the device
to activate it. When you log back onto GRT-101/GRT-401/GRT-402 after the
reboot, then you can use the "show system" command to verify the version of
the new firmware that is active, and restore your configuration.
Note: All configurations will be cleared during the upgrading procedure. Make sure that you have a backup
configuration file before you start the upgrading procedure. See section 3.17.1 Backup configuration for details.
:08A2
:MPC850SR(rev.B)
:4MB
:2MB
:AD20msp930
:SOHO
:152DAY/18HR/12MIN
624641 bytes
- - 68
GRT-101/401/402 User's Manual