User Profile - Planet GRT-101 User Manual

PLANET Technology Corp.
CRC Error Count
These statistics are:
• CRC error count — The cyclic redundancy check error count.
• Attenuation —The difference in decibels (dB) between the power level
received at the near end versus the power level transmitted from the far end.
• Signal-to-Noise (SNR) Margin — The SNR margin represents the amount of
increased received signal (in decibels) relative to the noise power level that the
unit is designed to tolerate without disconnecting from the network.
To display status of WAN ports, enter:
admin# status wan
WAN IP address
----- --------------- --------------- --- ----- ------ -------- ------
WAN1 192.168. 1. 1/255.255.255. 0
To list active route status currently, type:
admin# status route
Flag Destination /
---- ------------------------------------------ ------------ ---------
S 0.0.0.0/
C 200.0.8.0/ 255.255.255.0/ directly
C 192.168.0.0/ 255.255.255.0/ directly
C 127.0.0.1/255.255.255.255/ directly

3.14 User Profile

GRT-101/GRT-401/GRT-402 comes pre-configured with user profile 1 already
established, that is, user "admin" with password of "admin" and menu driven
user interface. The maximum number of user profiles is limited to 5. You can
add, delete, modify, or list the user profiles with the commands in the following
examples.
To change anyone of the user name and password, you must provide both
items together. For example, to change the password only to "76gu94t" for
user profile 1 (default user name "admin"), enter:
admin# admin user modify 1 profile admin 76gu94t
For user profile 1 with password "76gu94t", to change the username to "titan"
:0
/ NetMask
Netmask / Gateway
0.0.0.0/ 200.0.8.254
- - 61
GRT-101/401/402 User's Manual
VPI/ VCI Enc Protocol Active
0/ 32 LLC
Interface
200.0.8.1
200.0.8.1
192.168.0.218
127.0.0.1 Loopback
IPoA Yes
Portname
WAN1
WAN1
LAN