Management Security - Planet GRT-101 User Manual

PLANET Technology Corp.
type:
admin# admin user modify 1 profile titan 76gu94t
Certainly, you can change both user name and password in one command line.
The maximum length of user name and password is limited to 19.
To set the user interface for an existing user profile, e.g., user profile 1, use
"modify" and "attrib" commands:
admin# admin user modify 1 attrib command
The following commands add a new user profile 2 "test" with password
"83fdi7s", and set the user interface to menu mode:
admin# admin user modify 2 attrib menu
admin# admin user modify 2 profile test 83fdi7s
Note: You must perform the above procedure in the sequence as shown.
To show all user profiles with attributes, type:
admin# admin user list
Legal access user profile
No User Name
---- ------------------ -----------
1 titan
2 test
3 (Empty)
4 (Empty)
5 (Empty)
To delete user profile 2, enter:
admin# admin user clear 2
To save your changes, enter:
admin# write

3.15 Management Security

Since you can manage GRT-101/GRT-401/GRT-402 using Telnet and web
browser over the network either from LAN interface or from WAN interface, the
management security is important that it prevents invalid access to
GRT-101/GRT-401/GRT-402 from Internet. There are extra two levels of
UI Mode
Command
Menu
- - 62
GRT-101/401/402 User's Manual