Telnet; Web Browser - Planet GRT-101 User Manual

PLANET Technology Corp. GRT-101/401/402 User's Manual
After you logon to GRT-101/GRT-401/GRT-402 and before proceeding any
further, check the software version of GRT-101/GRT-401/GRT-402 by the
command:
admin> show system
If firmware file is downloaded from our local distributor or FTP server, please
refer to TFTP command in the section 3.18 Software Upgrade for more
information on how to update GRT-101/GRT-401/GRT-402 firmware.

3.2.2 Telnet

Make sure the correct Ethernet cable is used for connecting the LAN port of
your computer to GRT-101/GRT-401/GRT-402. The LAN LNK indicator on the
front panel shall light if a correct cable is used. Starting your Telnet client with
VT100 terminal emulation and connecting to the management IP of
GRT-101/GRT-401/GRT-402, wait for the login screen appears. When you see
the login screen, you can logon to GRT-101/GRT-401/GRT-402.
User: admin
Password: *****
Note: The factory default management IP and subnet mask are of 192.168.0.1 and 255.255.255.0, respectively. To
change these setting, see section 3.10.1 Bridge management and 3.11.1 LAN setting for routing mode operation. If
you have not set any user profile for GRT-101/GRT-401/GRT-402, enter the factory default user "admin". When the
system prompts you for a password, type "admin" to enter GRT-101/GRT-401/GRT-402. For more security issues for
remote management interfaces such as Telnet and web interface, see section 3.15 Management Security.

3.2.3 Web browser

Make sure the correct Ethernet cable is used for connecting the LAN port of
your computer to GRT-101/GRT-401/GRT-402. The LAN LNK indicator on the
front panel shall light if a correct cable is used. Starting your web browser and
connecting to the management IP of GRT-101/GRT-401/GRT-402, wait for the
login screen appears. When you see the login screen, you can logon to
GRT-101/GRT-401/GRT-402.
Note: The factory default management IP and subnet mask are 192.168.0.1 and 255.255.255.0 respectively. To
change these setting, see section 3.10.1 Bridge management and 3.11.1 LAN setting. If you have not change
- - 9