Multi-Level Password Protection - Planet GRT-101 User Manual

PLANET Technology Corp. GRT-101/401/402 User's Manual
Note: GRT-101/GRT-401/GRT-402 invokes menu driven interface when first time logon with default user profile
"admin". Both interfaces have on-line help information. To get on-line help, type "?" for CLI mode or press CTRL+Q
for menu driven interface.

3.4.1 Multi-level password protection

When you login via serial console or Telnet, GRT-101/GRT-401/GRT-402
defaults to a program execution (read-only) privileges to you. To change the
configuration and write changes to nonvolatile RAM (NVRAM), you must work
in enable mode. Follow the steps below to invoke the enable mode:
admin> enable
Supervisor password: ****
Note: The supervisor password is the same as that for web management interface. If you have not change password
setting for the web interface of GRT-101/GRT-401/GRT-402, enter "root" to enter GRT-101/GRT-401/GRT-402. For
more security issues for remote management interfaces such as Telnet and web interface, see section 3.15
Management Security.
You are now in enable mode. The system prompt appears:
admin#
Follow the steps below to change the user interface:
To select menu driven interface for user profile 1 (default user profile), enter:
- - 31