Planet GRT-101 User Manual page 42

PLANET Technology Corp.
To start machine configuration, please move the cursor " >>" to enable and
press enter key. GRT-101/GRT-401/GRT-402 will prompt for password for
enable mode, insert the supervisor password. (Default supervisor password is
root.) .
----------------------------------------------------------------------
Command: enable <CR>
Message: Please input the following information.
Supervisor password: ****
----------------------------------------------------------------------
In this sub menu, you can setup management parameters, upgrade machine
firmware, backup and restore system configurations via utility menu.
>> enable
setup
status
Modify command privilege
Configure system
Show running system status
GRT-101/401/402 User's Manual
- - 37