Planet GRT-101 User Manual page 27

G.shdsl bridge/router
Hide thumbs Also See for GRT-101:
Table of Contents

Advertisement

PLANET Technology Corp.
GRT-101/401/402 User's Manual
information protocol). RIP allows it to
exchange routing information with
other router. If set to Disable, the
gateway does not participate in any
RIP exchange with other router. If set
Enable, GRT-101/GRT-401/GRT-402
broadcasts the routing table of
GRT-101/GRT-401/GRT-402 on the
LAN and incoporates RIP broadcast
by other routers into it's routing table. If set silent, GRT-101/GRT-401/GRT-402
does not broadcast the routing table, but it accepts RIP broadcast packets that
it receives.
RIP Version: It determines the format
and broadcasting method of any RIP
transmissions by the gateway.
RIP v1: it only sends RIP v1 messages
only.
RIP v2: it send RIP v2 messages in
multicast and broadcast format.
Authentication required.
None: for RIP, there is no need of
authentication code.
Password: the RIP is protected by
password, authentication code.
MD5: The RIP will be decoded by
MD5 than protected by password,
authentication code.
Poison Reserve is for the purpose of
promptly broadcast or multicast the
RIP while the route is changed. (ex
shuting down one of
GRT-101/GRT-401/GRT-402 in
routing table)
Enable: machine will actively
broadcast or multicast the
information.
Disable: machine will not broadcast or multicast the information.
After modifying the RIP parameters, press finish.
The screen will prompt the modified parameter. Check the parameters and
perss Restart to restart GRT-101/GRT-401/GRT-402 or press Continue to
setup another parameters.
- -
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grt-401Grt-402

Table of Contents