Virtual Server - Planet GRT-101 User Manual

PLANET Technology Corp. GRT-101/401/402 User's Manual
addresses (eg: 192.168.0.10 ~ 192.168.0.50) collectively use two of the global
IP addresses (eg: 69.210.1.9 and 69.210.1.10). The Multi-NAT table will be
setup as;
Virtual Start IP Address: 192.168.0.10
Count: 40
Global Start IP Address:
69.210.1.9
Count: 2
Press Finish to continue.
The screen will prompt the
parameters that will be written in
GRT-101/GRT-401/GRT-402.
Check the parameters before
writing in GRT-101/GRT-401/GRT-402. Press Restart to restart
GRT-101/GRT-401/GRT-402 working with new parameters or Continue to
configure another parameter.

Virtual Server

For example: Specific ports on the WAN interface are re-mapped to services
inside the LAN. As only 69.210.1.8 (e.g., assigned to WAN from ISP) is visible
to the Internet, but does not actually have any services (other than NAT of
course) running on gateway, it is said to be a virtual server. Request with TCP
made to 69.210.1.8:80 are remapped to the server 1 on 192.168.0.2:80, other
requests with UDP made to 69.210.1.8:25 are remapped to server 2 on
192.168.0.3:25.
Click Virtual Server to configure the parameters.
Type the necessary parameters
then click Finish.
Press Restart to restart
GRT-101/GRT-401/GRT-402 or
press continue to setup another
function.
- - 24