Starting Pl-Ems Management - Planet EPL-2000 Quick Installation Manual

Hide thumbs Also See for EPL-2000:

5. Starting PL-EMS Management

Figure 5-1 IP Management Diagram

The following shows how to start-up the PL-EMS Management of the GEPON OLT.

Please note the GEPON OLT is configured through an Ethernet connection, making

sure the manager PC must be set to the same IP subnet address.

For example, the default IP address of the GEPON OLT is 192.168.1.10 (the

factory-default IP address), then the manager PC should be set to 192.168.1.x

(where x is a number between 1 and 254, except 10), and the default subnet

mask is 255.255.255.0.

1. Double-click the PL Server icon on the PC desktop. After a couple of seconds, it

will appear on the lower-right corner of the system tray.

Figure 5-2 PL Server Icon

Table of Contents