Reboot; Ping; Administration; User Profile - Planet GRT-101 User Manual

PLANET Technology Corp.

3.4.7 Reboot

To reboot GRT-101, use reboot command. Move cursor to " >> " to write and
press enter.
---------------------------------------------------------------------
Command: reboot <CR>
Message: Please input the following information.
Do you want to reboot? (y/n): y
---------------------------------------------------------------------

3.4.8 Ping

Ping command will be used to test the connection of router. Move cursor " >>
" to ping and press enter.
---------------------------------------------------------------------
Command: ping <ip> [1~65534|-t] [1~1999]
Message: Please input the following information.
IP address <IP> : 10.0.0.1
Number of ping request packets to send (TAB select): 1~65534
Data size [1~1999]: 32
---------------------------------------------------------------------

3.5 Administration

You can modify the user profile, telnet access, SNMP (Simple Network Man-
agement Protocol), supervisor information and SNTP (Simple Network Time
Protocol) in machine enable mode.
For configuration the parameters, move the cursor " >> " to admin and press
enter.
>> user
security
snmp
passwd
Id
sntp

3.5.1 User Profile

You can use user command to clear, modify and list the user profile. You can
setup at most five users to access GRT-101 via console port or telent in user
profile table however users who have the supervisor password can change the
configuration of GRT-101. Move the cursor " >> " to user and press enter key.
Manage user profile
Setup system security
Configure SNMP parameter
Change supervisor password
Change supervisor ID
Configure time synchronization
- - 37
GRT-101 User's Manual