Supervisor Password And Id - Planet GRT-101 User Manual

Community
Move the cursor to list and press enter, you can view full listing on SNMP Trap Host Pool.

10.13.5 Supervisor Password and ID

The supervisor password and ID is the last door for security but the most important. Users who
access the router via web browser have to use the ID and password to configure the router
and users who access the router via telnet or console mode have to use the password to
configure the router. Suggest changing the ID and password after the first time of configuration,
and save it. At next time when you access to the router, you have to use the new password.
User name
Password
Supervisor ID
Supervisor Password
----------------------------------------------------------------------
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password: ****
Input new Supervisor password: ********
Re-type Supervisor password: ********
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: admin id <pass_conf>
Message: Please input the following information.
Legal user name (Enter for default) <root> : test
----------------------------------------------------------------------
The default admin ID is "root".
Supervisor ID and Password:
Supervisor ID
Supervisor Password
Factory default
admin
admin
root
root
- - 118
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual