Telnet - Planet GRT-101 User Manual

Command: utility upgrade <ip> <file>
Message: Please input the following information.
Pressing enter key will perform firmware upgrade.

3.2.2 Telnet

Make sure the correct Ethernet cable is used for connecting the LAN port of your computer to
GRT series. The LAN LNK indicator on the front panel will light up if a correct cable is used. To
start your Telnet client with VT100 terminal emulation and connect to the management IP of
GRT series, wait for the login screen to appear. When you see the login screen, you can logon
to GRT series.
User: admin
Password: *****
The factory default management IP and subnet mask are 192.168.0.1 and
255.255.255.0, respectively. If you have not set any user profile for GRT series,
enter the factory default user "admin". When the system prompts you for a
password, type "admin" to enter GRT series.
GRT-101/401/402 User's Manual
- - 17
G.SHDSL Bridge/Router