Editing Custom Options; Adding The Dhcp Option; Activating The Leases - Avaya 4600 Series Administrator's Manual

Editing Custom Options

Use the following procedure to edit custom options.
1
Highlight the newly-created scope.
2
Select DHCP Options
3
Click the New button.
4
In the Add Option Type dialog box, enter an appropriate custom option name, for example,
"46XXOPTION".
5
Change the Data Type Byte value to String.
6
Enter 176 in the Identifier field.
7
Click the OK button.
The DHCP Options menu displays.
8
Select the Option Name for 176 and set the value string.
9
Click the OK button.
10
For the Option Name field, select 003 Router from the drop-down list.
11
Click Edit Array.
12
Enter the Gateway IP address recorded in
Installation - Per DHCP Server,
13
Select Add and then OK.

Adding the DHCP Option

Use the following procedure to add the DHCP option.
1
Highlight the scope you just created.
2
Select Scope under DHCP Options.
3
Select the 176 option that you created from the Unused Options List.
4
Click the Add button.
5
Select option 003 from the Unused Options List.
6
Click the Add button.
7
Click the OK button.
8
Select the Global parameter under DHCP Options.
9
Select the 176 option that you created from the Unused Options List.
10
Click the Add button.
11
Click the OK button.

Activating the Leases

Use the following procedure to activate the leases.
1
Click Activate under the Scope Menu.
The light-bulb icon for the scope lights.
4600 Series IP Telephone Release 2.1 LAN Administrator's Guide
July 2004
Defaults in the menu.
Table 2, Required Network Information Before
on page 41 for the New IP Address field.
Server Administration
DHCP
47