Image Elements - Avaya 4600 Series Administrator's Manual

Creating Web sites for the 4610SW and 4620 IP Telephones

Image Elements

Image Elements
•
<img> tag - The <img> tag is used to place an image in the text flow. The 4620 supports the
rendering of black-and-white Wireless Bitmap (WBMP) images, up to 152 pixels wide and 1536
pixels (96 lines of 16 pixels high each) high. Large images are not recommended. Images can be
part of a link and can be selectable. At most, 10 images can be displayed per card.
Attribute Value
align top
middle
bottom
alt cdata
height px (pixel)
%
hspace px
%
localsrc cdata
src url
vspace px
%
width px
%
118
Description
Aligns the image
REQUIRED. Sets an alternate text to be
displayed if the image is not displayed. If
this is not supplied, either default text
displays (if available) or the following
message displays: "Image not displayed".
Sets the height of the image
Sets white space to the left and right of the
image
Sets an alternate representation for the image
REQUIRED. The path to the image. Must be
a .wbmp file.
Sets white space above and below the image
Sets the width of the image
4600 Series IP Telephone Release 2.1 LAN Administrator's Guide
Comments
NOT SUPPORTED
SUPPORTED
NOT SUPPORTED; the
true height parameters will
be determined by parsing
the WBMP information.
SUPPORTED; default is 1
pixel.
NOT SUPPORTED
SUPPORTED
SUPPORTED; default is 1
pixel.
NOT SUPPORTED; the
true width parameters will
be determined by parsing
the WBMP information.
July 2004