Editing Custom Options; Adding The Dhcp Option - Avaya one-X 1603SW Administrator's Manual

6. Enter a sensible name for the Name field, such as "CM IP Telephones," where CM would
represent Avaya Communication Manager.
7. Click OK.
A dialog box prompts you: Activate the new scope now?
8. Click No.
Note:
Activate the scope only after setting all options.
Note:

Editing Custom Options

Use the following procedure to edit custom options.
1. Highlight the newly created scope.
2. Select DHCP Options-->Defaults in the menu.
3. Click the New button.
4. In the Add Option Type dialog box, enter an appropriate custom option name, for example,
"16xxOPTION."
5. Change the Data Type Byte value to String.
6. Enter 242 in the Identifier field.
7. Click the OK button.
The DHCP Options menu displays.
8. Select the Option Name for 242 and set the value string.
9. Click the OK button.
10. For the Option Name field, select 003 Router from the drop-down list.
11. Click Edit Array.
12. Enter the Gateway IP Address recorded in
Installation - Per DHCP Server
13. Select Add and then OK.

Adding the DHCP Option

Use the following procedure to add the DHCP option.
1. Highlight the scope you just created.
2. Select Scope under DHCP Options.
3. Select the 242 option that you created from the Unused Options list.
4. Click the Add button.
Table 3: Required Network Information Before
for the New IP Address field.
DHCP Server Administration
Issue 1 June 2010 55