Avaya 4600 Series Administrator's Manual page 68

Server Administration
Administering Options for the 4600 Series IP Telephones
Table 6: 4600 Series IP Telephone Customizable System Parameters Continued
Parameter Name Default Value
PHNLD 1
PHNLDLENGTH 10
PHNOL 9
PHY1STAT 1
PHY2STAT 1
PROCPSWD " " (Null)
PROCSTAT 0
RTCPMON " " (Null)
SNMPADD " " (Null)
SNMPSTRING public
STATIC 0
VLANTEST 60
NOTE:
Table 6
Telephones have additional, optional administration. See
IP Telephone on page 71
page 75, below, for more information.
68
Description and Value Range
Telephone long distance access code - the digit dialed to access public
network long distance trunks from the serving MultiVantage
Range: 1 digit or "" (Null).
Length of national telephone number - the number of digits in the
longest possible national telephone number for the location of the
serving Avaya media server. Range: 1 or 2 digits, from "5" to "15".
Outside line access code - the character(s) dialed to access public
network local trunks from the serving Avaya media server. Range: 0-2
dialable characters, including "" (Null).
Ethernet line interface setting (1=auto, 2=10Mbps half-duplex,
3=10Mbps full-duplex, 4=100Mbps half-duplex, 5=100Mbps full-
duplex).
Secondary Ethernet interface setting (0=Secondary Ethernet interface
off/disabled, 1=auto, 2=10Mbps half-duplex, 3=10Mbps full-duplex,
4=100Mbps half-duplex, 5=100Mbps full-duplex).
Text string containing the local (dialpad) procedure password (Null or
1-7 ASCII digits).
Local (dialpad) Administrative Options status (0=all Administrative
Options are allowed, 1=only VIEW is allowed)
Text string containing the 4-octet IP Address of the RTCP monitor
currently in use.
Text string containing one or more allowable source IP addresses for
SNMP queries, in dotted decimal or DNS format, separated by
commas, with up to 127 total ASCII characters
Text string containing the SNMP community string (up to 32 ASCII
characters).
Static programming override flag. If set to "0" static programming
never overrides file server- (DHCP or TFTP) or call server-
administered data. If set to "1" static programming overrides only file
server-administered data. If set to "2" static programming overrides
only call server-administered data. If set to "3" static programming
overrides both file server- and call server -administered data.
Number of seconds to wait for a DHCPOFFER when using a non-zero
VLAN ID (1-3 ASCII digits, from "0" to "999").
applies to all 4600 Series IP Telephones. The 4630/4630SW and 4620 IP
and Customizing the 4610SW/4620/4620SW IP Telephones
4600 Series IP Telephone Release 2.1 LAN Administrator's Guide
™
server.
Customizing the 4630/4630SW
July 2004
on