Avaya 4600 Series Administrator's Manual page 67

Table 6: 4600 Series IP Telephone Customizable System Parameters
Parameter Name Default Value
AGCHAND 1
AGCHEAD 1
AGCSPKR 1
CTISTAT 1
CTIUDPPORT 49721
DHCPSTD 0
DNSSRVR " " (Null)
DOMAIN " " (Null)
ENHDIALSTAT 1
IRSTAT 1
L2QAUD 6
L2QSIG 6
L2QVLAN " " (Null)
MCPORT 1719
NTWKAUDIO 0
OPSTAT 111
PHNCC 1
PHNDPLENGTH 5
PHNIC 011
4600 Series IP Telephone Release 2.1 LAN Administrator's Guide
July 2004
Administering Options for the 4600 Series IP Telephones
Description and Value Range
Automatic Gain Control status for handset (0=disabled, 1=enabled).
Automatic Gain Control status for headset (0=disabled, 1=enabled).
Automatic Gain Control status for speakerphone (0=disabled,
1=enabled).
Computer-Telephony Integration (CTI) Status (1=enabled, 0=disabled).
CTI UDP listener port (49714 through 49721, inclusive).
DHCP Standard flag. If set to "1" the telephone strictly follows the
DHCP standard with respect to giving up IP addresses when the DHCP
lease expires. If set to "0" the telephone continues using the IP address
until reset or a conflict is detected (see
Text string containing the IP address of one or more DNS servers (at
least one of which must be a valid, non-zero, dotted decimal address).
Text string containing the domain name to be used when DNS names in
system values are resolved into IP addresses.
Enhanced Dialing Status. If set to "1" the
feature is turned on for all associated applications. If set to "0" the
feature is turned off.
Text string containing status of Infrared interface (0= off/disabled, 1=
on/enabled).
Layer 2 audio priority value (0 to 7).
Layer 2 audio priority value (0 to 7).
802.1Q VLAN IDentifier (1 to 4094).
Media server transport-layer port number (0-65535).
Network Audio Quality Assessment Display (1=on, 0=off).
Options status flags. Consists of 3 "bits" of the form abc, where each
letter represents a 0 (disabled/off) or 1 (enabled/on). The first bit, a,
controls the setting for all options not controlled by the second or third
bits. The second bit, b, controls the setting for view-oriented options
(for example, the 4620's View IP Settings option), if applicable. The
third bit, c, controls the setting for the LOGOFF option, if applicable.
Telephone country code. The administered international country code
for the location of the serving MultiVantage
digits, from "1" to "999".
Telephone dial plan length - the length of the administered dial plan for
™
the serving MultiVantage
"10".
Telephone international access code - the digits dialed to access public
network international trunks from the serving Multi-Vantage
Range: 1-4 digits.
Server Administration
DHCP Generic Setup).
Enhanced Local Dialing
™
server. Range: 1-3
server. Range: 1 or 2 digits, from "3" to
™
server.
67