Additional functions
PC interface (V24, USB)
You can use the PC interface (via a SLIM Lumberg cable) to read and mod-
ify phonebook entries, pictures and sounds.
Configuring the PC interface
To configure the PC interface, you must:
1. deactivate the Bluetooth interface on the handset (
2. use a Siemens data cable (
3. install the MPM application.
For more information, consult your system administrator.
Data transfer mode
Certain functions necessitate the transfer of large volumes of data be-
tween the handset and the computer. When these functions are selected,
the handset switches to data transfer mode and "Data Transfer" appears on
the display. In this mode, no inputs are possible via the keyboard and calls
are ignored.
The handset is switched to data transfer mode by:
•
•
•
114
terface jack on the handset to the computer.
If the PC interface does not work, first deactivate the Bluetooth in-
terface (
Page 117), then switch the handset off and back on.
activating read/write access to the phonebook
loading screensavers
loading melodies
The handset automatically switches to idle if a fault occurs in the
course of transferring data.
Page 130) to connect the headset/PC in-
Page 117).