Dsc Test; Programming Mmsi Into Individual Directory; Dsc Test Call By Using Individual Directory - Standard Horizon MATRIX GX2100 Owner's Manual

11.12 DSC TEST

This function is used to contact another DSC equipped vessel to ensure the
DSC functions of the radio are operating.
To use this feature, the radio you will be transmitting the test call to
needs to have the DSC Test feature.
To perform the DSC test you will need to enter a MMSI of another vessel into
the Individual directory or manually enter in the MMSI using the procedure
below.

11.12.1 Programming MMSI into Individual Directory

Refer to section "11.5.1 Setting up the Individual / Position Call Directory".

11.12.2 DSC Test call by using Individual Directory

1. After programming a individual MMSI into the GX2000/GX2100 (refer to
section "11.5.1 Setting up the Individual / Position Call Directory").
2. Press the [ CALL ( MENU )] key. The "DSC
Menu" will appear.
3. Rotate the CHANNEL knob to select "DSC
TEST", then press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select the Ship name
and press the [ SELECT ] soft key.
5. Press the [ YES ] soft key to transmit the DSC
test call to the other vessel.
After the radio receive a Test Call reply from ves-
sel that was called, the radio will ring and show
TEST ACK display, which confirms the radio you
called received the test call.
Page 78
NOTE
NOTE
GX2000/GX2100