8.9
CHANGING COG TO TRUE OR MAGNETIC
Allows the GPS Course Over Ground to be selected to show in True or Mag-
netic. Factory default is True however by following the steps below the COG
can be changed to Magnetic.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu" appears, then select "GENERAL SETUP"
with the CHANNEL knob.
2. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select "MAGNETIC".
3. Press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select "MAGNETIC"
or "TRUE".
5. Press the [ ENT ] soft key to store the selected set-
ting.
6. Press the [ QUIT ] soft key several times to return to
radio operation.
GX2000/GX2100
Page 25