Channel Function Setup; Channel Group; Scan Memory - Standard Horizon MATRIX GX2100 Owner's Manual

13 CHANNEL FUNCTION SETUP

13.1 CHANNEL GROUP

This section selects a channel group from USA, Canada, and International.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Rotate the CHANNEL knob to select "CH
FUNCTION SETUP".
3. Press the [ SELECT ] soft key, then rotate the
CHANNEL knob to select "CH GROUP".
4. Press the [ SELECT ] soft key.
5. Rotate the CHANNEL knob to select desired
channel group "USA", "INTL", or "CANADA".
6. Press the [ ENT ] soft key to store the selected set-
ting.
7. Press the [ QUIT ] soft key several times to return to radio operation.

13.2 SCAN MEMORY

To be able to scan channels the radio must be programmed. This section al-
lows channels to be stored in scan memory.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "CH FUNCTION
SETUP".
3. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select "SCAN MEMORY".
4. Press the [ SELECT ] soft key.
5. Rotate the CHANNEL knob to select a desired chan-
nel to be scanned, the press the [ ADD ] key. "MEM"
icon appears on the display, which indicates the
channel has been selected to the scan channel.
6. Repeat step 5 for all the desired channels to be
scanned.
7. To DELETE a channel from the list, select the chan-
nel then press the [ DELETE ] key. "MEM" icon dis-
appears from the display.
8. When you have completed your selection, press the [ QUIT ] soft key sev-
eral times to return to radio operation.
GX2000/GX2100 Page 89