Controlling Other Equipment; Using The Remote Control With Other Components; Recalling Preset Codes - Pioneer VSA-AX10Ai Operating Instructions Manual

Controlling other equipment

Chapter 7
Controlling other equipment
Using the remote control with other
components
The supplied remote control can operate not only this
amplifier, but also your TV, DVD player and other
components. If the component is listed in the remote
control's memory, simply follow the steps in Recalling
preset codes below. If the component is not listed, or if
you want the remote to learn additional operations, see
Programming signals from other remote controls on
page 63.
Note
• The remote control operations in this section are
accessed from the remote setup menu. To go to the
remote setup menu, press
control Home menu (
HOME 1/3
AMPLIFIER AMPLIFIER
INPUT 1 2 3
TV
DVR
SAT
/ DVD
/ LD
DVR
CD TUNER
/ VCR1
TV MULTI SYSTEM
CONT OPERATION OFF
SETUP
• For more on navigating the remote control menu
screens, see Basic remote control displays on
page 30. See also TV control menu screens on page 32
and Operating menus for additional components on
page 33.
• When using a TV, it is often best to use the TV/DVD
input for the TV source, and TV CONT for the TV
screen or monitor.
from the remote
SETUP
):
SETUP 1/3
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION

Recalling preset codes

The following steps show you how to recall preset codes
for each input source. Use the remote control touch
screen to do this.
1 Make sure the component you want to control is
switched on.
2 Press PRESET RECALL on the remote setup menu.
SETUP
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION
3 From the 'Select Function' screen, choose the
input function which matches the connection for the
component you want to control.
For example, press DVD/LD if you want to control the
DVD player that you connected to the DVD/LD terminals.
Select Function
PRESET RECALL
DVD/LD
TV/DVD
• Use the (cursor up/down) buttons to scroll
through the component options.
• You can select any button, but choosing a button
that's already assigned will overwrite the old preset
(and any other operations you may have
programmed).
1/3
SAT
CANCEL
07
61
En