Table of Contents
Advertisement
Q. Why does the system hang up as soon as a visitor begins to communicate
with a resident?
A. This may be caused by the following: the talk timer may be set for too short a
duration. While in configuration mode, check that the talk timer is set to more
than 30 seconds (factory default is set to 60 seconds).
Q. When a visitor places a call and begins to talk, he or she cannot hear the
resident. Why?
A. The speaker may not be working correctly. Unlock the panel and perform a
visual inspection of the speaker:
Look for loose wires or loose solders as well as damaged components.
Check that the volume in the panel speaker is set properly, by entering the
configuration mode and review the speaker volume setting.
If there are no loose wires and the volume in the panel speaker is set properly,
there may be a problem with the speaker, then adjust the potentiometer marked
"SPEAKER" located on the back of the front entry panel display (must open the
front entry panel door).
Q. The LCD display has no display or the display has dark blocks on it.
Why?
A. There may be a problem with the contrast level. The potentiometer (contrast
control) is located on the back of the keypad/display board. Unlock the front door
and adjust the potentiometer for a darker or light contrast display.
Q. Why is there no dial tone when a visitor calls a resident?
A. The NSL system does not utilize an independent telephone line, and therefore
does not require a dial tone. The system works with the TX3-NSL-8M Relay unit
to ring/call your apartment.
Q. I misplaced the key for the telephone access system. How do I obtain a
replacement?
A. The Mircom key part number is LK-304. Contact your local distributor or
Mircom Head Office for a replacement.
Q. What happens when the visitor gets an answering machine when trying
to contact a resident?
A. The system will allow the visitor to leave a voice message on the answering
machine.
Version 1.1
Telephone Access System User Guide
LT-968
Copyright 2012
Configuration
33 (42)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
Je ne sis pas capable de rentrer dans le programme ou on peut retirer , ajouter, changer le nom et 3 de téléphone des condos
To access the programming for the Mircom TX3 Series and add, remove, or change names and phone numbers:
1. Use the main entry panel keypad.
2. Navigate to the configuration menu.
3. Select the option to add, delete, or edit records.
4. Follow the on-screen instructions to enter or modify resident names and dial codes using the alphanumeric keypad.
5. Confirm changes by pressing the telephone (enter) key.
The system allows adding up to 200 names at a time, depending on the model's capacity (200, 1000, or 2000 names).
This answer is automatically generated