Table of Contents
Advertisement
2.3
Viewing Configuration Information
To view configuration information, you must first enter the configuration mode.
To enter configuration mode
Main Menu
1. Configuration
2. Operation
3. View CFG Info
Figure 1.
2.4
Entering Configuration Mode
To make changes to the resident list at the panel, you must first enter the
configuration mode.
To enter configuration mode
Enter the Passcode
[ _ _ _ _ _ _ _ _ _ ]
Figure 2.
Version 1.1
Telephone Access System User Guide
LT-968
Copyright 2012
1.
Press
2.
Press the
Press the
3.
The configuration information displays. You may
need to scroll to view all the information.
Viewing Configuration Information
1.
Press
2.
Select Configuration menu.
3.
Enter the passcode.
4.
If you have not set a personal password,
press
(four-digit factory default).
5.
If you have set a personal passcode, enter your
passcode.
You are now in configuration mode.
Entering Configuration Mode
.
(scroll down) to "View Cfg Info".
key to enter.
.
Configuration
13 (42)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
Je ne sis pas capable de rentrer dans le programme ou on peut retirer , ajouter, changer le nom et 3 de téléphone des condos
To access the programming for the Mircom TX3 Series and add, remove, or change names and phone numbers:
1. Use the main entry panel keypad.
2. Navigate to the configuration menu.
3. Select the option to add, delete, or edit records.
4. Follow the on-screen instructions to enter or modify resident names and dial codes using the alphanumeric keypad.
5. Confirm changes by pressing the telephone (enter) key.
The system allows adding up to 200 names at a time, depending on the model's capacity (200, 1000, or 2000 names).
This answer is automatically generated