Table of Contents
Advertisement
2.10
Setting the Talk and Door Timers
To set the talk time and door timers, you must be in Configuration Mode. Refer
to Entering Configuration Mode on page 13 for instructions.
2.11
Talk Timer setup
The talk timer defines the maximum length of time that a visitor speaks with a
resident.
To set up the talk timer
6. Aux door Timer
7. Talk Timer
Talk Timer
[ 060 ]
Figure 7.
You have successfully set up the on-line timer. The display now returns to the
configuration menu.
Telephone Access System User Guide
18 (42)
LT-968
Copyright 2012
1.
Select Configuration Menu, System Option.
2.
Press
find "Talk Timer".
3.
Press
Timer". The display enters Talk Timer setup.
4.
Enter time duration between 10 to 300 seconds.
The factory default is 60 seconds.
5.
Use the up down arrows to change value.
6.
Press
Talk Timer Setup
(scroll up) or
(scroll down) to
when the arrow is beside "Talk
to save and continue.
Configuration
Version 1.1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
Je ne sis pas capable de rentrer dans le programme ou on peut retirer , ajouter, changer le nom et 3 de téléphone des condos
To access the programming for the Mircom TX3 Series and add, remove, or change names and phone numbers:
1. Use the main entry panel keypad.
2. Navigate to the configuration menu.
3. Select the option to add, delete, or edit records.
4. Follow the on-screen instructions to enter or modify resident names and dial codes using the alphanumeric keypad.
5. Confirm changes by pressing the telephone (enter) key.
The system allows adding up to 200 names at a time, depending on the model's capacity (200, 1000, or 2000 names).
This answer is automatically generated