Table of Contents
Advertisement
2.15.1
Adding New Records
Photocopy and then fill out the worksheet provided on page 35 to record the
resident information needed for adding new records.
2.15.2
Entering resident names
Once you have entered the configuration menu, select the database menu and
then press the telephone key to enter the Add Record menu. After Apt no and
Dial code, the following screen appears:
To enter a resident name
1.
2.
press once = comma
press twice = dash
press 3 times = left bracket
press 4 times = right bracket
press 5 times = /
press 6 times = &
press 7 times = 1
press * once = backspace
press 0 once to delete a character
press 0 twice = 0
Telephone Access System User Guide
22 (42)
LT-968
Copyright 2012
Enter Resident Name
[ _ _ _ _ _ _ _ _ _ _ ]
Use the number keys to select the appropriate character. See Figure 11 for
the characters that correspond to each number.
Press any number key once, twice, three or more times to cycle through the
characters associated with that key. When you reach the character you
want, stop pressing the key and the character will remain in the display.
press # once = space
Configuration
Version 1.1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
Je ne sis pas capable de rentrer dans le programme ou on peut retirer , ajouter, changer le nom et 3 de téléphone des condos
To access the programming for the Mircom TX3 Series and add, remove, or change names and phone numbers:
1. Use the main entry panel keypad.
2. Navigate to the configuration menu.
3. Select the option to add, delete, or edit records.
4. Follow the on-screen instructions to enter or modify resident names and dial codes using the alphanumeric keypad.
5. Confirm changes by pressing the telephone (enter) key.
The system allows adding up to 200 names at a time, depending on the model's capacity (200, 1000, or 2000 names).
This answer is automatically generated