Table of Contents
Advertisement
Telephone Access System User Guide v.1.1 for Windows 2000/NT/XP®.
This manual, as well as the software described in it, is provided under licence or other agreements
and may be used or copied only in accordance with the terms of such license. The content of this
manual is furnished for informational use only. It is subject to change without notice, and should not
be construed as a commitment by Mircom. Mircom assumes no responsibility or liability for any errors
or inaccuracies that appear in this book.
Except as permitted by such license, no part of this publication may be reproduced, stored in a
retrieval system, transmitted in any form by means electronic, mechanical, using any recorded
media, or any other format without the prior written permission of Mircom.
Microsoft, MS-DOS, Windows, and Windows 2000/NT/XP are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
2 (42)
Telephone Access System User Guide
LT-968
Copyright 2012
Copyright 2012 Mircom Inc.
All rights reserved.
Mircom
25 Interchange Way
Vaughan, Ontario
L4K 5W3
905.660.4655
Fax:905.660.4113
Version 1.1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
Je ne sis pas capable de rentrer dans le programme ou on peut retirer , ajouter, changer le nom et 3 de téléphone des condos
To access the programming for the Mircom TX3 Series and add, remove, or change names and phone numbers:
1. Use the main entry panel keypad.
2. Navigate to the configuration menu.
3. Select the option to add, delete, or edit records.
4. Follow the on-screen instructions to enter or modify resident names and dial codes using the alphanumeric keypad.
5. Confirm changes by pressing the telephone (enter) key.
The system allows adding up to 200 names at a time, depending on the model's capacity (200, 1000, or 2000 names).
This answer is automatically generated