Table of Contents
Advertisement
2.7
Main Door DTMF Setup
The main door DTMF setup feature allows the resident to use their telephone
touch tone keypad to open the main door.
To set up the main door DTMF
2.Line Type
3.Main Door DTMF<
Main Door DTMF
[ x ] '9'
Figure 4.
You have successfully set the main door DTMF. The display now returns to the
configuration menu.
Version 1.1
Telephone Access System User Guide
LT-968
Copyright 2012
1.
Select Configuration Menu, System Option.
2.
Press
(scroll up) or
"Main Door DTMF".
3.
Press
when the arrow is beside "Main Door
DTMF", the display enters Main Door DTMF setup.
4.
Select any digit between 1 to 9, * or #, and press
This selection becomes the designated (touch tone)
number or symbol that opens the main door. The
factory default is "9".
5.
Press
to save and continue.
Main Door DTMF Setup
Configuration
(scroll down) to find
.
15 (42)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
Je ne sis pas capable de rentrer dans le programme ou on peut retirer , ajouter, changer le nom et 3 de téléphone des condos
To access the programming for the Mircom TX3 Series and add, remove, or change names and phone numbers:
1. Use the main entry panel keypad.
2. Navigate to the configuration menu.
3. Select the option to add, delete, or edit records.
4. Follow the on-screen instructions to enter or modify resident names and dial codes using the alphanumeric keypad.
5. Confirm changes by pressing the telephone (enter) key.
The system allows adding up to 200 names at a time, depending on the model's capacity (200, 1000, or 2000 names).
This answer is automatically generated