Mircom TX3 Series User Manual page 24

Table 1: List of Screens
Enter Elev Rest Addr
[_ _]
Enter Elev Rest Relay
[_ _]
Keyless Corr
[x] Main door relay
[ ] Aux door relay
Line to Use
[x] Line 1 - 5
Enter Ring Pattern
[x] Ring Pattern 1-5
4.
2.15.3 Using keyless entry codes
To enter the premises with a keyless entry code, you must first be in normal mode.
While in normal mode, press 0, after which point you are prompted with "Enter
keyless code". The keyless code is a numeric value from 1 to 999999.
To enter your keyless code
1.
2.
Telephone Access System User Guide
24 (42)
LT-968 Copyright 2012
YES YES
YES YES
YES YES
YES YES
YES N/A
When you are finished adding the new record, press Enter (the telephone
key) the display shows "New Record Added". The display returns to the
configuration menu.
Press 0. The keyless enter code appears.
Enter your keyless code.
Enter the ID (or address) of the Elevator
Restriction controller for the resident.
Enter the elevator restriction relay number for
the resident.
Select which door (main, auxiliary or both)
can be opened by the resident using a keyless
code.
Enter the speech path for resident to
communicate to the ADC line or to a relay
control unit. Line 1 is default.
Enter the ring pattern for the resident. See
Table 2 for available ring patterns. The
default is 1.
Configuration
Version 1.1