Table of Contents
Advertisement
2.8
Auxiliary Door DTMF setup
The auxiliary door DTMF setup feature allows the resident to use their telephone
touch tone keypad to open the auxiliary door.
To set up the auxiliary door DTMF
3. Main Door DTMF
4. Aux Door DTMF<
Aux Door DTMF
[ x ] 6
Figure 5.
You have successfully set the auxiliary door DTMF. The display now returns to
the configuration menu.
Telephone Access System User Guide
16 (42)
LT-968
Copyright 2012
If you have not setup Main Door DTMF,
1.
Press
(scroll up) or
find "Aux Door DTMF".
2.
Press
when the arrow is beside "Aux Door
DTMF". The display enters Aux Door DTMF setup.
3.
Select any digit between 1 to 9, * or #, and press
This selection becomes the designated (touch tone)
number or symbol that opens the auxiliary door. The
factory default is "6".
DO NOT select "4", this is used to refuse entry or
disconnect.
4.
Press
to save and continue.
Auxiliary Door DTMF Setup
Configuration
(scroll down) to
.
Version 1.1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
Je ne sis pas capable de rentrer dans le programme ou on peut retirer , ajouter, changer le nom et 3 de téléphone des condos
To access the programming for the Mircom TX3 Series and add, remove, or change names and phone numbers:
1. Use the main entry panel keypad.
2. Navigate to the configuration menu.
3. Select the option to add, delete, or edit records.
4. Follow the on-screen instructions to enter or modify resident names and dial codes using the alphanumeric keypad.
5. Confirm changes by pressing the telephone (enter) key.
The system allows adding up to 200 names at a time, depending on the model's capacity (200, 1000, or 2000 names).
This answer is automatically generated