Preventive Maintenance; Limited Use Of The Copier In Trouble - Konica Minolta 7222 User Manual

When "Call for Service" Message Is Displayed (continued)

Limited Use of the Copier in Trouble

If the message shown below is displayed on the Call for Service Screen, you may
continue operating the copier on a limited function basis and utilize the trays and ADU
that are not affected by the trouble. To obtain this limited functionality of the copier,
consult your service representative. Be sure to utilize the limited function only
temporarily, and arrange for machine repair immediately.
1.
If the limited use of the copier is available, the following message is
displayed in the message area instead of the Report code.
ex.
Tray 2 failure
Press AUTO to select except this tray
2.
Press [AUTO RESET].
Please switch ON/OFF
E 18-2
Make note of the Report code No.
3.
Turn OFF then ON the power switch.
A copying job can continue without using the troubled portion of the machine (ex. Tray
2).
Even if the copying job can be continued with the above operation, be
sure to contact with your service representative immediately when the
Call For Service Screen is displayed.
5
Trouble-
shooting
Call for
Service
Preventive
Maintenance
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Troubleshooting
Tips
5-3