Password Setting - Konica Minolta 7222 User Manual

[5] Password Setting

Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen
Procedure
1 Touch 5. Password setting to display the W.T. Interrupt Password Setting Screen.
2 Use the touch screen keypad or the control panel keypad to enter a 4-digit password,
and then touch OK to complete the setting.
NOTE:
When the password setting is 0000, timer interrupt can be used simply by
turning the copier OFF, then ON.
3 Touch RETURN to return to the Weekly Timer Setting Menu Screen.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
13-40
[9] Weekly Timer (continued)
W.T. Interrupt Password Setting Screen