Konica Minolta 7222 User Manual page 190

Reverse the Second Side in 1-2 Mode (Flip Side 2) (continued)
2.
Touch Flip Side 2 on the Application Selection Screen.
The Flip Side 2 Screen will be displayed.
3.
Touch the desired binding type key.
4.
Touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Select additional copying features, as desired.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
When selecting 2-1 Flip Side 2 mode, use RADF to scan originals.
• See p. 3-2 to p. 3-6 for details on positioning originals.
• Use RADF store mode (p. 3-26 to p. 3-27) when the original count
9.
Press [START].
When the finisher / paper exit / inner tray capacity is exceeded due
to the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
9-26
exceeds 50.